Measuring your kitchen sink does not have to be a hard task. Well, whether you want to return your old sink or you are just wondering how big it is. Knowing how to measure that sink perfectly is very significant. With this guide, I’ll walk you through each step and make it easy in no time so you can get the exact sizes easily.
Contents
The Role of Measures in your Kitchen Improvement
Measure a kitchen sink may seem to be a simple task, but this is important for the success of your kitchen remodeling. A well-measured sink will seamlessly fit into your kitchen layout, thereby beautifying and making it more functional. So, as you start your kitchen remodel, remember that the sink is not just a mere functional fixture; it’s an important design element. The right sink in the right size can make your kitchen even more beautiful and easy for daily tasks.
When to Measure Your Kitchen Sink
There are several methods when measuring your kitchen sink is crucial. If your existing sink is damaged, obsolete, or no longer meets your requirements, exact sizes are necessary to find a proper replacement.
When designing a kitchen remodel, exact sink sizes confirm that your new sink blends seamlessly with the updated countertops and cupboards.
Also, if you’re unsure about your current sink’s size or need to provide measures for any reason, knowing how to calculate your kitchen sink properly is valuable.
Types of Kitchen Sinks and Their Sizes
The sizes of kitchen sinks can vary significantly based on their type and style. Your choice will depend on your size needs, daily needs, and wanted sink style. Here are some common sizes for different sink styles to guide your selection:
Single bowl sinks
- These sinks are the most common type, with widths ranging from 22 to 33 inches.The smaller performances are ideal for bar areas.
Double bowl sinks
- These range from 30-48 inches wide.
- Double-bowl sinks are popular among people who prefer to handwash their dishes. One side is for soaking in soapy water, while the other side is for rinsing. There are offset bowl sinks that feature one larger bowl and one smaller bowl. The less bowl is typically used for food prep. However, this sink type is widely felt unusable.
Farmhouse/apron front sinks
- The modern farmhouse sink typically ranges from 30 to 40 inches wide. Its deeper basin creates it ideal for cleaning large pots, pans, and meals prep.
- The farmhouse sink is a great fit for a kitchen designed in the farmhouse or cottage style.
Top mount sinks
- Also known as drop-in sinks, they have a visual rim or lip that rests on the countertop.
- Top support sinks range from tight 15 inches to 48 inches wide for a two bowl sink.
Undermount sinks
- Undermount sinks feature a rimless design and are attached to the underside of the countertop, creating a sleek and continuous flow. Compared to top-mount sinks, the undermount range in width size is from 24-36+ plus.
Measuring a Kitchen Sink in 7 Steps
Returning a kitchen sink can be part of a larger remodeling job, or it can be done on its own. Whether you are remodeling the whole kitchen or just replacing the sink, you need to take some measures first to make sure that the new sink is the right size. Here are some steps to take to make sure the data you collect is correct and useful.
Gather Your Tools
You don’t need a lot of tools to calculate a kitchen sink, but it is a good idea to collect everything you need early so that you know that you have it. To measure a sink accurately, you will need the following tools:
Tape bar (alternatively, a straightedge ruler or yardstick)
- Features, pens, or pencils
- A level
Prepare the Sink and Cabinet
It is not only the sink itself that you have to calculate when planning its reserve. Make sure to measure the space underneath the cabinet as well. Before you begin, you should make sure that the sink itself is pure and empty. You should also empty out the base cabinet under the sink so that you can take accurate actions.
Measure the Sink
The sink has to be measured out in short three sizes: length, width, and depth. The sink is measured from the back, where the tap is, to the front. The length is measured from the left side of the sink to the requested point.
When computing the depth of the sink, you cannot only put your ruler or tape count up along the side because the side of the sink usually curves just. The deepest end of the sink is somewhere in the centre. Lay your group or a straight-edge ruler across the sink so you can obtain an accurate size from the bottom to the top.
Determine What Type of Sink You Have
If you are familiar with the different types of sinks, you can likely identify them just by looking.If not, need to understand the various kinds of sinks to identify have:
Drop-in sinks are common types with a rim that rests on the counter.
Undermount sinks are not installed on top of the counter; instead, they are mounted beneath the countertop.They have a rim, but the countertop covers it up.
Apron sinks are also understood as farmhouse sinks. Unlike the other two, the front of the sink is told rather than covered up by false cupboard drawers. This type of sink also manages to be deeper than the other two.
The type of sink influences how you take measurements. For example, if you have a drop-in sink, you count to the edge of the rim, whereas with an undermount sink, you count to the edge of the opening. Take extra measures of the apron sink because of its told front.
Measure the Cabinet Space
If you plan to install a larger sink than the one you have now, may have to broaden the cabinet as well. Intend to install a sink of the same size, counting the cabinet tells you whether it will fit. In either case, counting the cabinet is an vital step.
Depth and width mean other things when calculating the cabinet. The cabinet’s depth is measured from the back to the front along the bottom. The width of the cabinet is measured from the left edge to the right edge. There is usually a small margin of counter area along the sides of the sink, so to choose the sink width, remove four inches from the width of the cupboard and one inch from its depth.
Measure the Cutout
Thus far, the measurements you need can be handled with the sink still in class. To calculate the cutout for the sink, first remove the existing sink.Therefore, this should be one of your final steps.
Take the measurements the equal way that measured the sink but, relying on the type of sink, the measurements vary. The measurement for the cutout of an undermount sink should match the dimensions of the sink itself. However, because a drop-in sink has a lip that relaxes on the counter, the cutout for a drop-in sink should be just less than the sink’s sizes.
Confirm Accuracy
Accurate sizes are very important to the success of your project. To make sure the sizes are accurate, take each of them at least twice.
Conclusion
Estimating your kitchen sink is a little but vital step in your renovation or sub project. If you skip this step or get it wrong, it can cause annoying and costly issues later. Take your time, double-check your sizes, and don’t delay to ask for help if you need it.
Once you have the right measures and know your sink’s size, you’ll be prepared to pick out a great new sink or make sure the one you’ve chosen fits correctly in your updated kitchen.